how to install transmission kit 35-6615 on maytag washer

It should spin inside the bearing like wet ice, gliding on the film of oil. Your old one could be reused if it's not very worn and fits smoothly inside the bearing without any slop between the inter bronze piece and the tube. I put in a new spin tube for good measure. Then put a film of the oil on the inside of the bearing and on the outside of the new spin tube and insert. When the absorption slows down the wicking is saturated and no more oil is necessary. Depending on the age of the bearing it may absorb more or less oil. This is for the old style (fat) bearings. Pull the rubber back away from the bronze bushing on the bottom of the bearing and saturate the wicking with turbine oil. Post# 574216, Reply# 21 at 05:20 (3,622 days old) by beekeyknee (Columbia, MO)īottom view. After the outside was clean I very carefully wiped out the bronze inside of the bearing with a microfiber cloth. Rubber protectant (Armor All) could also be used too, I guess. Then I dampened the brush with kerosene or other light solvent that isn't harmful to rubber and cleaned the outside of the bearing, used a lint free cloth and polished up the rubber with Pledge. I cleaned the bearing by first knocking away all the loose particles of dirt and metal shavings I had made cutting off the mounting stem by using a stiff toothbrush brush. Be patient and don't push hard all at once to keep from damaging the tub. Put a clean cloth over the bearing, put your foot on it and push down while rocking your foot around in a circular motion with gradually increasing pressure until the bearing is pushed from the bottom of the tub.

Puting some turbine oil around the outside of the bearing where the rubber part contacts the porcelain should help remove it. The bearing is removed from the tub by elevating the tub with a couple of 2x4's on each side to protect the porcelain drain tube.

PLEASE CONTACT US FOR FITMENT WE ARE HAPPY TO HELP****WE USE TAMPER STICKERS FOR OUR ITEMS, DO NOT REMOVE WE USE THESE FOR RETURNS FOR VERIFICATION.**We offer 30-Day Returns from date of delivery.We Ship and Answer Messages Mon-Fri 8AM-5PM.We test all of our items for full functionality, however if we miss something.Here's the tub bearing removed from the tub and cleaned. **DO NOT PURCHASED BASED ON APPEARANCE, OUR ITEMS HAVE PART #’S FOR A REASON. Item: 233873320713 Clean Tested Maytag Whirlpool Washer Transmission Gear Case Assembly P# 35-6615.

How to install transmission kit 35-6615 on maytag washer